Skip to content
Digital Tool Space

Guides

Percentage Change, Discounts and Tips

A practical reference for percentages, percentage change versus percentage points, discounts, stacked reductions, tax and bill splitting, with worked examples and common mistakes.

Most percentage mistakes are not arithmetic mistakes. They come from using the right formula on the wrong question, or from comparing percentages that were calculated on different bases. This reference sets out the common questions and shows the working.

Four percentage questions

QuestionFormulaExample
What is X% of Y?(X ÷ 100) × Y15% of 80 = 12
X is what percent of Y?(X ÷ Y) × 10012 is 15% of 80
Change from old to new?((new − old) ÷ old) × 10080 → 100 is +25%
Difference between two values?(|a − b| ÷ average) × 10080 and 100 differ by 22.22%

The third and fourth rows are the ones people mix up. Change compares the new value to the old value as the base. Difference compares the two values to their average, which makes the answer the same whichever value is entered first. Use change when one value came before the other; use difference when neither is a baseline.

Percentage change versus percentage points

A rate that moves from 10% to 12% has risen by 2 percentage points, but it has risen by 20% in relative terms (2 ÷ 10 × 100). Both statements can be true; they answer different questions. News reports and product claims often rely on the ambiguity, so check which base is being used.

  • 10% → 12%: +2 percentage points, +20% relative increase.
  • 50% → 25%: −25 percentage points, −50% relative decrease.
  • 5% → 10%: +5 percentage points, +100% relative increase.

Why increases and decreases are not symmetric

Add 20% to 100 and you get 120. Subtract 20% from 120 and you get 96, not 100. The second calculation takes 20% of a larger base, so it removes more. To return from 120 to 100, the reduction must be 16.67% (20 ÷ 120 × 100), not 20%.

This is why "up 10%, then down 10%" is not a round trip. The order matters when percentages are applied one after another, because each one changes the base for the next.

Discounts, with tax

A 25% discount on an 80.00 price removes 20.00, leaving 60.00. If tax of 10% is added to the reduced price, the tax is 6.00 and the final price is 66.00. The Discount Calculator follows that order: discount first, then tax on the discounted amount.

That order matches how most shops price a reduced item, but not every jurisdiction or invoice works that way. If tax is calculated on the original price and the discount is applied afterwards, the final figure will differ. Check the receipt or the local rule rather than assuming.

Stacked discounts

Two discounts applied in sequence do not add. A 20% discount followed by 10% off the reduced price multiplies the price by 0.8 and then by 0.9, for a total multiplier of 0.72. That is 28% off, not 30%.

StepPrice on 100.00Multiplier
Start100.001.00
20% off80.000.80
Then 10% off72.000.72

The same logic applies to a discount followed by tax: they are successive percentages, so multiply the multipliers rather than adding the percentages.

Working backwards from a sale price

If a 60.00 sale price reflects 25% off, the original was 60 ÷ 0.75 = 80.00. Dividing by 0.75 is not the same as adding 25% to 60: adding 25% gives 75, which is too low, because the 25% was taken from the original 80, not from the sale price.

A 100% discount has no finite original price: every price multiplied by zero is zero, so the original cannot be recovered. The Discount Calculator treats that case as undefined rather than inventing a number.

Tips and splitting a bill

A tip is a percentage of a base, then a division. On an 84.00 bill with an 18% tip, the gratuity is 15.12 and the total is 99.12. Split four ways, that is 24.78 per person. The Tip Calculator divides the total evenly; it does not weight shares by what each person ordered.

Decide whether the tip is based on the pre-tax or post-tax total, because the two produce different amounts. Tipping norms also vary by country and by service, so the calculator does not choose a percentage for you.

Common percentage mistakes

  • Dividing by the new value for percentage change. The base is the original value: (new − old) ÷ old.
  • Adding successive percentages. 20% then 10% is a 0.8 × 0.9 multiplier, not a 30% reduction.
  • Confusing points and percent. A move from 10% to 12% is 2 points, or 20% relative.
  • Applying a discount to the wrong base. A discount on a tax-inclusive price removes more money than the same discount on the pre-tax price.
  • Rounding before the final step. Keep the full value and round the answer, especially when the result is money.

Which tool to use

Limits

These calculations are arithmetic, not financial or legal advice. Currency symbols are presentation only; no exchange-rate conversion is performed. Tax rules, tipping expectations and invoice conventions vary by place, so confirm any figure that carries a legal or contractual consequence.

Browse all tools